Iboate® SF-10 Industrial Safety Helmet with Integrated Visor — Product Detail Page

SHORT DESCRIPTION

The Iboate SF-10 is an advanced industrial safety helmet engineered for demanding job sites where overhead impacts, airborne debris, and heat fatigue intersect. It features an integrated retractable clear visor for instant eye protection without separate goggles, a dial-fit adjustment system for precise sizing, and switchable ventilation ports that open or close depending on weather and job site conditions. Supported by a multi-pivot suspension liner with optional EPS impact foam, the SF-10 delivers balanced, secure protection across construction, quarrying, and plant maintenance. Available in six high-visibility and standard shell colors.

Quick Specs

 TECHNICAL SPECIFICATIONS

HERO / VALUE PROPOSITION

Head and eye protection working as one integrated system.

On a modern job site, safety equipment only works when it stays on. In hot weather, sealed helmets get uncomfortable; on dusty, sunlit sites, workers constantly juggle loose safety glasses with hard hats, risking dropped gear or unprotected eyes.

The Iboate SF-10 eliminates that friction. By mounting a smooth-pivoting eye visor directly to a ventilated, dial-adjustable shell, workers can deploy or retract eye protection with a single gloved motion. When the temperature climbs, open the sliding side vents for active airflow; when dust or rain kicks up, slide them shut. Combined with a multi-pivot internal harness that cradles the head without pressure points, the SF-10 provides dependable, shift-long comfort that workers keep on from gate-in to whistle.

KEY FEATURES

Integrated Clear Pivot Visor
Built-in transparent eye shield pivots smoothly down over the eyes or tucks up against the brim when not in use. Shields against windblown dust, gravel, and flying chips while eliminating the need for independent safety glasses.

Switchable Ventilation System
Equipped with side-mounted ventilation slots featuring an easy slide shutter. Workers can manually open or close the air vents to adapt instantly between stifling outdoor heat and wet, dusty environments.

Precision Dial Adjustment Knob
The rear ergonomic dial ratchet allows rapid, one-handed circumference tuning—even while wearing heavy work gloves. Ensures a snug, wobble-free fit that stays locked during active bending and climbing.

Multi-Pivot Suspension Liner
Engineered internal harness utilizes multiple pivot anchors to distribute impact energy evenly across the crown, preventing concentrated hot spots and minimizing neck strain over long shifts.

Optional EPS Foam & Modular Accessories
Modular architecture supports optional internal EPS absorption foam and accessory attachments, allowing safety managers to customize impact ratings and loadouts to specific site specifications.6 High-Visibility & Standard Shell Colors

Supplied in six distinct shell options—Orange, Yellow, White, Blue, Red, and Black—to facilitate clear departmental identification, trade differentiation, or matching corporate branding.

BUILT FOR THE JOB

Mining, quarrying & heavy earthwork.
Surrounded by haul trucks, excavators, and unpaved terrain, workers in surface extraction face continuous sun exposure, flying grit, and vibration. The SF-10 keeps dust out of the eyes with its contoured visor while the ventilated shell prevents heat buildup in open-pit conditions.

Precision engineering for daily wear.
From the secure click of the dial adjustment to the smooth action of the vent shutter, every mechanical touchpoint is built for gloves-on operation in abrasive, real-world conditions.

Crew differentiation made simple.
With six factory colors available, safety managers can easily standardize roles across the site—supervisors in white, machine operators in orange or yellow, technicians in blue, and specialized trades in red or black.

APPLICATIONS & TRADES

Mining, quarrying & aggregates

surface extraction, heavy plant operation, rock processing

Heavy civil & earthmoving

road building, site grading, trenching, crane zones

Building & industrial construction

structural steel, scaffolding, masonry, commercial sites

Plant operations & maintenance

utilities, processing facilities, mechanical service

Demolition & outdoor site work

flying fragment hazards, outdoor sunlight, dusty tasks

STANDARDS & COMPLIANCE

As visible on the visor and helmet assembly, the Iboate SF-10 carries:

CE Certification Mark

Meets applicable European conformity safety requirements for protective headwear and eye protection components.

Optional Modular Upgrades

Available with optional EPS absorption foam to enhance impact performance for specialized work protocols.

Specific EN test standards (e.g., EN 397 for industrial helmets / EN 166 for eye protectors), batch compliance certificates, and laboratory test reports are provided upon request. Please contact our technical sales team for the relevant documentation package for your destination market.

OEM / ODM CUSTOMIZATION OPTIONS

Build your customized fleet helmet on the SF-10 platform:

Custom Logo Printing

Front crown, side, or rear pad printing for company identity and contractor branding.

Color Customization

Standard 6 colors available from stock; custom Pantone color matching available for volume contract orders.

Accessory Configurations

Factory-configured with or without integrated visor, EPS foam liner, or custom chin strap hardware.

Export Packaging

Custom display boxes, master cartons, barcode labels, and multilingual user manuals for wholesale distributors.

Standard Shell Colors Available:
Orange · Yellow · White · Blue · Red · Black

FAQ

Q: Does the helmet come with the visor included?
A: Yes. The SF-10 is equipped with an integrated clear pivot visor that mounts directly to the helmet pivots, and it can also be ordered with optional auxiliary goggles or accessory configurations.

Q: Can the ventilation holes be closed in cold or wet weather?
A: Yes. The SF-10 features a built-in sliding vent cover on each side. Workers can slide the shutter open for maximum cooling airflow or close it to keep out rainwater and windblown grit.

Q: How is the helmet size adjusted?
A: Sizing is controlled via a rear-mounted dial ratchet knob. Simply turn the dial clockwise to tighten or counter-clockwise to loosen, allowing an exact custom fit in seconds while wearing gloves.

Q: What colors are available for the helmet shell?
A: Six standard shell colors are shown: Orange, Yellow, White, Blue, Red, and Black. Custom corporate colors can also be produced for OEM volume orders.

Q:Is the helmet CE certified?
A: Yes. As shown on the physical product assembly, the SF-10 carries the CE conformity mark for industrial personal protective equipment.

CONTACT

Need fleet pricing, custom company logos, or sample units for safety evaluation?
Send us your target quantity and preferred color assortment—our technical sales engineers will provide an itemized FOB/CIF quotation and compliance documentation within 24 hours. Contact our team →